en:doku:report-work [Gordons Reloading Tool Community]

en:doku:report-work

The source “Work “ are all current input values set by the user from the input fields “Caliber”, “Projectile” and “Propellant”.

Source.Property	Description	Type
Field “Caliber”
work.CaliberName	Calibre designation	text
work.Dz	Bore diameter	number
work.pmaxZul	Max. all. pressure	number
work.Aeff	Eff. cross section	number
work.caselen	Case length (L3/CL)	number
work.casevol	Case volume	number
work.oal	Cartridge length (L6/OAL)	number
work.Vb	Combustion chamber eff.	number
work.sebert	Sebert-Factor	number
work.xe	Barrel length	number
work.xeEff	Projectile path	number

Field “Projectile”
work.ProjectileName	Manufacturer/Name	text
work.caliber	Caliber (numeric designation)	number
work.Dbul	Diameter	number
work.mp	Mass	number
work.ps	Initial pressure	number
work.glen	Length	number
work.gdepth	Seating depth	number
work.gdepthc	Guided seating depth	number
work.gtailtype	Tail type	text
work.gtailh	Tail length	number
work.gtaildiaA	Cone dia A	number
work.gtaildiaB	Cone dia B	number
work.gmaterial	Material	text
work.gUBCS	Univ. identification code	text
work.g1bc	Bullet “G1-BC”	number
work.g7bc	Bullet “G7-BC”	number

Field “Propellant”
work.PropellantName	Manufacturer/Name	text
work.Qex	Spec. explosive heat	number
work.k	Isentropic exponent	number
work.Ba	Combustion coefficient	number
work.a0	prog./deg. coefficient	number
work.z1	Transition limit 1	number
work.z2	Transition limit 2	number
work.pc	Material density	number
work.pcd	Bulk density	number
work.pt	Powder temperature	number
work.mc	Poweder mass (charge)	number
work.laddercnt	Loading ladder steps	number
work.laddermc	Step size	number

en/doku/report-work.txt
Last modified: 2021/05/30 03:34
(external edit)